| View previous topic :: View next topic |
| Author |
Message |
kadeater
Joined: 19 Apr 2006
Posts: 22
Location: In the Northland
|
| Posted: Fri Jun 30, 2006 3:35 pm Post subject: I cant believe I just shot this group |
|
|
| I recently built a semi-custom 7mm Rem. Mag and have been working up some reload data. I think I figured out the load when I went shooting this morning. After cleaning my gun my first shot is the one up and right. Then next four all went through the same hole. The 4 shot group measures at .045"! This is by far my best group ever so I thought it only right to share. |
|
| Back to top |
|
fourtycal
Joined: 13 May 2005
Posts: 874
Location: Midvale
|
| Posted: Sun Jul 02, 2006 10:09 pm Post subject: |
|
|
Nice shooting! so are you into sharing the load?
I'll be trying some 22-250 loads tomorrow. |
|
| Back to top |
|
kadeater
Joined: 19 Apr 2006
Posts: 22
Location: In the Northland
|
| Posted: Mon Jul 03, 2006 8:34 am Post subject: |
|
|
fourtycal wrote: Nice shooting! so are you into sharing the load?
I'll be trying some 22-250 loads tomorrow.
Sure. I am using 64.2gr of IMR7828, Federal Match large magnum primers, 168gr. Berger VLD bullets with Federal Premium Brass cut to 2.490". Bullets are seated 3 thousandths off the lands/grooves. My gun is a Remington 700 PSS with a 26" and 1/9.5 twist barrel. That load gets me just over 3000 fps.
What is your 22/250? I will get my load that I shoot in mine and post it later. I know I am shooting Winchester 760 ball powder, but don't remember how much right now, Hornady V-max 50gr. bullets, Federal Match Primers, and Federal Premium brass. I haven't been loading those for a little while so I will have to look to see how much powder and brass Length. Bullets are
seated 3 thousandths of the lands/grooves. I shoot a Remington VSF with a 28" barrel and 1/14 twist. They are shooting at 3625 fps. |
|
| Back to top |
|
fourtycal
Joined: 13 May 2005
Posts: 874
Location: Midvale
|
| Posted: Mon Jul 10, 2006 6:17 pm Post subject: |
|
|
kadeater wrote:
What is your 22/250?
I shoot a Weatherby SVM, The 22-250 load is 55 grain nossler spitzer, Federal 210 primer, Winchester brass trimmed to 1.912", IMR4895 34.0 grains and aol at 2.50". I have not shot through a chronograph but should be at 3600fps. It needs to be tuned a little but is close. |
|
| Back to top |
|
| |
